SUPERLAVABILE

Easy-to-use waterborne single-component based on acetovinyl copolymers, which creates a continuous, washable film by evaporation of water, with good breathability, high covering power and good resistance to mold attack.

Decoration of internal and external walls not exposed to direct water. Ideal for apartments, stairways and hallways, offices, public places, laboratories and industrial buildings. It can be pigmented with pastes for water-based paints, in order to obtain soft colors.

Very absorbent and chalking walls should be consolidated with FIBROPROTEX PRIMER. Cement-based substrates must be properly left to season. To restore missing parts and smooth the surfaces, use COLORSIVIT RASANTE. On old paints, check the solidity of the substrate and then operate directly.

SUPERLAVABILE should be applied in 2 stages, diluted with water (about 5-10%). The wall must be clean, dry, free from dust and mold residues. The consumption of the product varies from 0.10 and 0.16 l/m² per layer, depending on the absorption of the substrate

Shades of yellow, orange or some reds may require more passage to obtain a good covering effect (in some cases a first layer of white is recommended). Different production batches of the same color may have small differences: where possible, use material from a single production batch. Some colors based on organic pigments (reds, blues, greens, intense yellows, ...) tend to lose color if they are subjected to abrasion (dry or wet): in these cases it is advisable to protect the color with a recovery transparent finish.

Product for professional use, the buyer undertakes to follow the above warnings in the application of the purchased product and the instructions in the safety data sheet.