PITTURA ANTIMUFFA
Anti-mildew wall paint
Water-based wall paint for the restoration of surfaces subject to mould formation.
Type: Wall Paint
Description
Easy-to-use water base single-component product based on acetovinyl copolymers.
By evaporation of the water, a continuous film is formed, super washable, with good breathability, high hiding power and excellent resistance against the formation of mold.
Uses
Restoration of surfaces subject to the formation of mold.
It can be pigmented with water-based pastes for water-based paints, in order to obtain light colors.
Preparation of the support
Very absorbent and prone to chalking walls should be consolidated with FRIBROPROTEX PRIMER.
Cement-based substrates must be left to sesoning.
To restore missing parts and smooth the surfaces, use COLORSIVIT RASANTE.
On old paints, check the solidity of the substrate and then operate directly.
Application
PITTURA ANTIMUFFA must be applied in 2 stages, diluting with water (about 5-25%).
Each substrate must be clean, dry, free from dust and mold residues.
Consumption is approximately 0.10-0.16 l/m2 for each shot, depending on the absorption of the substrate.
Technical specifications
| PRODUCT DATA | |
|---|---|
| Colour | White or on request (for minimum batches of 400 liters) |
| Specific gravity (at 25 °C) | 1,54 +/- 0,05 g/ml (ref. White) |
| Dry residue | 9.780 +/- 2.000 mPascal (spindle 2, rpm 3, ref. White) |
| Viscosity (at 25 ° C) | 60% by weight and 39% by volume (ref. White) |
| Flash point | None |
| Solvent for cleaning tools | Water |
| Hazard symbols on labels | None |
| Storage | 12 months, store in a dry place at a temperature between 5 °C and 30 °C |
| APPLICATION DATA AND TIMES | |
|---|---|
| Dry to the touch (50% R.H.) | at 5 °C 40-50 min at 25 °C 25-35 min at 30 °C 10-20 min |
| Coating (50% R.H.) | at 25°C 6 hours |
| Environmental conditions of use | Temperatures between + 5 °C and + 35 °C and R.H. <80% |
