PITTURA ANTICONDENSA
Anti-mold atermic mural hydropitting
Single-component product easy to use based on copolymers of acrylic esters in water dispersion. By evaporation of the water a continuous film is obtained which turns out to be:
- athermic, thanks to the presence of glass microspheres that strongly reduce the thermal conductivity (with consequent reduction of the formation of condensation)
- anti-mold, thanks to the presence of a broad-spectrum funghicides, which hinder the formation of mold
Type: Wall Paint
Description
Easy-to-use single-component product based on copolymers of acrylic esters in water base.
By evaporation of the water, a continuous film is obtained which is:
- non thermic, thanks to the presence of glass microspheres that strongly reduce thermal conductivity (with consequent reduction of condensation)
- anti-mold, thanks to the presence of a broad spectrum fungicides, which hinder the formation of mold
Uses
Surface restoration in environments with high humidity and poor ventilation, such as: cellars, closets, kitchens, canteens, bathrooms, swimming pools and food industries.
It can be pigmented with water-based pastes for water-based paints, in order to obtain light colors.
Preparation of the support
Very absorbent and prone to chalking walls should be consolidated with FIBROPROTEX PRIMER.
Cement-based substrates must be left to season properly. To adhere to ceramic and other non-absorbent surfaces, a second coat of FONDO PER PIASTRELLE must be applied.
To restore missing parts and smooth the surfaces, use COLORSIVIT RASANTE.
Application
PITTURA ANTICONDENSA paint should be applied in 2 stages, diluting with water (about 5-10%).
Each wall must be clean, dry, free from dust and mold residues.
Consumption is approximately 0.10-0.20 l/m2 for each shot, depending on the absorption of the substrate.
Product for professional use, the buyer undertakes to follow the above warnings in the application of the purchased product and the instructions in the safety data sheet.
Technical specifications
| PRODUCT DATA | |
|---|---|
| Colour | White or on request (for minimum batches of 150 liters) |
| Specific gravity (at 25°C) | 0,90 +/- 0,05 g/ml |
| Dry residue | 12.000 +/- 2.000 mPascal (spindle 2, rpm 4) |
| Viscosity (at 25 °C) | 61% |
| Flash point | None |
| Solvent for cleaning tools | Water |
| Hazard symbols on labels | None |
| Storage | 12 months, store in a dry place at a temperature between 5°C and 30°C |
| APPLICATION DATA AND TIMES | |
|---|---|
| Dry to the touch (50% R.H.) | at 7°C 70-80 min at 25°C 40-50 min at 30°C 20-30 min |
| Coating (50% R.H.) | at 25°C 4 hours |
| Environmental conditions of use | Temperatures between + 2°C and + 35°C and R.H. <80% |
