Trowel-applied acrylic coating on concrete or drywall walls
Trowel-applied system on concrete or drywall walls, based on acrylic resins and finished with a transparent polyurethane topcoat.
Substrate Preparation
Check that there are no traces of moisture and perform a thorough inspection of the surface to be treated. The substrate must be solid, level, absorbent, and free from oils, detergents, dust, or other contaminants. Sand the surface and carry out careful dust removal.
Application
- Apply a first coat of FIBROPROTEX PRIMER diluted 1:1 with water by roller, at a consumption of 0.02–0.03 kg/m².
- After 30 minutes, apply a second coat of FIBROPROTEX PRIMER diluted 1:1 with water by roller, at a consumption of 0.02–0.03 kg/m².
- Apply a smoothing coat of COLORSIVIT M with a smooth trowel, at a consumption of 0.5–0.8 kg/m².
- Apply a first smoothing coat of SIMPLE TOP with a smooth trowel, at a consumption of 0.5 kg/m².
- Apply a second smoothing coat of SIMPLE TOP with a smooth trowel, at a consumption of 0.5 kg/m².
- Apply a first coat of transparent protective finish FINIWATER TOP by roller, at 0.10–0.125 kg/m².
- Apply a second coat of transparent protective finish by roller, using either FINIWATER or alternatively FINISOL, in gloss, satin, or matte finish depending on the required gloss level, at 0.10–0.125 kg/m².
Used products
Contact us
Discover
