Decorative troweled Epoxy coating

Substrate Preparation

The cement substrate must be solid, level, absorbent, and free from oils, detergents, dust, or other contaminants. For newly laid screeds, the standard curing time must be observed. Grind with an orbital grinder equipped with diamond tools, followed by thorough dust removal.

Application

1. Apply PAVIWATER T68 with a roller, diluted 1:3 by weight with water, at a consumption of approximately 0.05 kg/m².
   
2. Apply the first skim coat with a smooth trowel of ECOFONDO PLUS FIBRATO at 1.0 kg/m².
   
3. Apply the second skim coat with a smooth trowel of ECOFONDO PLUS FIBRATO at 1.0 kg/m².
   
4. Apply the first decorative skim coat with a smooth trowel according to the desired texture:
   - COLORSIVIT MALTA, 0.5–0.6 kg/m²,
   - or COLORSIVIT MALTA FINE, 0.3–0.4 kg/m²,
   - or COLORSIVIT MALTA FUSION, 0.4–0.5 kg/m².
   
5. Apply the second decorative skim coat with a smooth trowel according to the desired texture:
   - COLORSIVIT MALTA, 0.5–0.6 kg/m²,
   - or COLORSIVIT MALTA FINE, 0.3–0.4 kg/m²,
   - or COLORSIVIT MALTA FUSION, 0.4–0.5 kg/m²,
   - or two coats of TRIDESIGN TOP, 0.5–0.7 kg/m².
   
6. Apply the first layer of transparent protective coating FINIWATER TOP with a roller at 0.10–0.125 kg/m².
   
7. Apply the second layer of transparent protective coating, FINIWATER or alternatively FINISOL (glossy, satin, or matte depending on the required gloss level), at 0.10–0.125 kg/m².