Self-levelling, anti-static, vapour permeable

Preparation of the substrate

The Concrete Substrate must be solid, levelled, absorbent, not polluted by oils, cleaners, dust or any other substance.
For new concrete substrate, the seasoning time must be respected.
Choose the most convenient mechanical preparation: Grinding or Blasting.
The concrete substrate must have a resistance between 10.000 and 100.000 Ohm.

Application

1. The porosity of the substrate must be filled with a layer of PAVIWATER T68 applied by roll and diluted in the ratio of 1 to 3 with water, for a consumption of around 0,050 kg/m² of A+B.
2. Set-up of electrical discharge points via copper strips in the near of the electric connectors.
3. Smooth with a trowel the SUPERCONDUPLAST W, diluted with 7% in weight of water and added with 10% of Quarzo B1, for a consumption of SUPERCONDUPLAST W of 0,50 kg/m².
4. Smooth (2° layer) with a trowel the SUPERCONDUPLAST W (7% in weight of water and 10% of Quarzo B0), for a consumption of SUPERCONDUPLAST W of 0,30 kg/m².
5. Apply by roll one layer of PAVIWATER T68 diluted in the ratio of 1 to 3 with water, for a consumption of around 0,050 kg/m² of A+B.
6. Apply the self-levelling coating CONDUPLAST W, for a consumption of CONDUPLAST W of 4,0 kg/m². On the still fresh product use a spiked roller to enable de-airation.
7. When requested, apply by roll the COATING ESD, for a consumption of 0,08 kg/m².
8. After this, apply by roll a layer of PAVIWATER ANTISTATICO, (use the same colour as the COATING ESD) for a consumption of 0,09 kg/m².
9. The joints must be cut and sealed with the poly-urethane elastomer SIGILFLEX.

The final thickness of resinous covering is around 2 mm.