FIBROPROTEX® TIPO D
Impregnant auxiliary plate in asbestos cement
Single-component water-based primer. Auxiliare fixative for asbestos-cement surfaces.
Type: Funds, Consolidants, Primers
Description
Acetovinyl copolymer water base of red color.
The product dries by evaporation of water, leading to the formation of a red film.
Use
To be applied to avoid the dispersion of fibers in the environment to support removal interventions (Article 5, paragraph 5 of Ministerial Decree 6 September 1995) and during the disposal of materials containing asbestos.
Application
- Type D encapsulating coatings
On asbestos-cement slabs a low pressure spraying must be carried out, depositing the product on the entire visible surface, for a consumption of about 0.30 l/m2.
The thickness of the dry film is 20-25 microns, considering a support absorption of 0.20 lt. The same treatment must be repeated after the removal of the plates, consolidating all exposed surfaces. - Other manufactured goods
Apply the product by spraying at low pressure on all surfaces until the decoesionate parts are completely saturated.
Technical specifications
| PRODUCT DATA | |
|---|---|
| Colour | Red |
| Specific gravity (at 25 °C) | mixture (A+B): 1,00 - 1,05 g/ml |
| Viscosity (at 25 °C) | mixture (A+B): 10-20 mPascal (spindle 1, rpm 200) |
| Dry residue (A+B) | 25% by weight |
| Flash point | None |
| Solvent for cleaning tools | Water |
| Hazard symbols on labels | None |
| Storage | 12 months store in a dry place at a temperature between 5 °C and 35 °C |
| APPLICATION DATA AND TIMES | |
|---|---|
| Dry to the touch (50% R.H.) | at 5°C 40-45 min at 25°C 25-35min at 35°C 10-20min |
| Environmental conditions of use | Temperatures between +5 °C and +28 °C and R.H. < 80% |
| PERFORMANCE TECHNICAL DATA | |
|---|---|
| Appearance | Liquid |
