FERPLAST A+B
Anti-corrosion epoxy primer with high solid content
High solid two-component anticorrosion primer for metal surfaces.
Type: Funds, Consolidants, Primers
Description
Two-component product based on epoxy resins in combination with polyamide hardeners.
Having a high content of solids, FERPLAST allows a considerable thickness in a single shot and offers the ideal base for dusting quartz or iron granules in the formation of non-slip coatings. The hardening and the time for coating are fairly fast.
Use
Anticorrosive primer for ferrous materials.
Base coat for non-slip coating on metal products.
Preparation of the support
Surfaces in ferrous material must be carefully prepared in order to eliminate calamine residues: we recommend pickling or sandblasting.
It is necessary to verify that operating on already painted surfaces there is no risk of detachment.
Eliminate any rust.
Application
Combine the 2 components in a single container and mix carefully using a drill with a whisk.
After mixing, the reaction between the 2 components begins, for which the entire contents must be used within the "useful life" time.
Apply the product using a roller or brush, for a consumption of about 0.25 kg/m2, corresponding to a thickness of about 200 microns.
As a base for non-slip coatings, apply approximately 0.50 kg/m2, then immediately dust with iron and/or quartz granules. Once hardened, remove the unanchored granules and coat by applying a return of PAVIPLAST, for a consumption of about 0.70 kg/m2
Technical specifications
| PRODUCT DATA | |
|---|---|
| Colour | RAL 8004 |
| Specific gravity (at 25 °C) | mixture (A+B): 1,25 +/- 0,05 g/ml |
| Viscosity (at 25 °C) | mixture (A+B): 1.500 +/- 300 mPascal |
| Dry residue (A+B) | 96% by weight and 94.7% by volume |
| Flash point | > 44°C |
| Solvent for cleaning tools | Solvent |
| Storage | 12 months store in a dry place at a temperature between 5 °C and 35 °C |
| APPLICATION DATA AND TIMES | |
|---|---|
| Pot-life (50% R.H.) | at 10°C >30min at 25°C 20min at 30°C >10min |
| Environmental conditions of use | Temperatures between +10 °C and +30 °C FERPLAST should be applied at a substrate temperature of at least 3°C higher than the condensation temperature. |
